380 Class Explosive Atmosphere Flourescent Fixture


	0

Customer Login | New User

Thermoplastic Exit Signs
Tritium Exit Signs
Edge Lit Exit Signs
Cast Aluminum Exit Signs
Combo Exit Signs
Wet Location Exit Signs
Photoluminescent Exit Signs
LEC Exit Signs
New York Approved Exit Signs
Chicago Approved Exit Signs
Industrial Exit Signs

Modern Emergency Lighting
Industrial Emergency Lighting
Wet Location Emergency Lighting
Remote Heads

ADA Braille
Fire Safety Signs
Fire Safety Supplies
Exit Path Markings
Egress Signs

LED Lamps and Bulbs
Fluorescent High Bay Lighting
Wall Packs
Recessed Cans
Recessed Trims

Retrofit Kits
Wire Guards
Emergency Light Batteries

Occupancy Sensors
Circuit Breakers
Emergency Ballast
Custom Signs

380 Class Explosive Atmosphere Flourescent Fixture

SKU: ESW-EXP-380

Our Price: $0.00

Qty:

Email this item to a Friend

PRODUCT OVERVIEW
The 380 Series is a must for any Explosive Atmosphere Location! (see listings below) This product has five different hub entries at each end enabling the installer to wire the fixture for more desirable angles than a single entry. The center located ballast allows for a more balanced fixture for ease of installation and weight distribution. The 380 Series is available in 2’ & 4’ lengths for 2, 3, & 4 lamp combinations in T5, T5HO, T8, T8HO, T12 & T12HO. Lamps included

LISTINGS:
UL 844 listed and labeled - Hazardous Locations: Class I, Division 1, Groups C and D; Class I, Division 2, Groups A, B, C and D
Class II, Division1 and 2, Groups E, F and G; Class III. UL
1598A listed and labeled - marine type lighting fixture. Outside Type (salt water)
UL 1598A testing equivalent to NEMA 4X requirements for hose-down and corrosion resistance.
UL listed 1598
UL listed and labeled for use inside paint spray booths and rooms.
Also meets requirements for National Fire Protection Association Standard 33
and National Electrical Code Article 516.
UL C approved and labeled Class I, Division 1, Group C and D
Class I, Division 2, Groups A, B, C and D
Class II, Division 1 and 2, Groups E, F and G; Class III.
NEMA 3, 4X, 7CD, 9EFG.
Simultaneous presence Class I and Class II
Suitable for use inside paint spray booths.
Class I, Zone 1, Group II A
Class I, Zone 1, Group II B

HOUSING:
Factory Sealed, Cast Natural Aluminum (U.S. Foundry) that is lightweight
Ballast mounted in the center for better balance and low profile.
(5) 1/2” NPT
Hubs located at 0°, 45° and 90° angles.

REFLECTOR:
One piece painted aluminum reflector with 93% reflective white finish
LENS: 3/16” Clear tempered glass tubes

ELECTRICAL:
120-277 Volt (T5, T5HO & T8 only)
120 Volts (T8HO, T12, & T12HO)
220 Volts 50 Hz (T12)
277 Volts (T8HO, T12, & T12HO)
347 Volts (T8 & 4 Ft. T12 only)

APPLICATIONS:
Hazardous locations, Paint spray booth, Marine/shipboard, Chemical Manufacturers
Oil Drilling Rigs, Gas Processing Plants, Refineries
OPTIONS: All Options Ordered Separately - See next page
Optional Polycarbonate Shield and Stainless Steel Guard.
EM: Emergency Battery Backup Ballast 120 or 277V MUST SPECIFY
HB: 93% Reflective specular reflector insert